Install and Set Up kubectl on Windows

Before you begin

You must use a kubectl version that is within one minor version difference of your cluster. For example, a v1.22 client can communicate with v1.21, v1.22, and v1.23 control planes. Using the latest compatible version of kubectl helps avoid unforeseen issues.

Install kubectl on Windows

The following methods exist for installing kubectl on Windows:

• Install kubectl binary with curl on Windows
• Install on Windows using Chocolatey or Scoop

Install kubectl binary with curl on Windows

1. Download the latest release v1.22.16.

   Or if you have curl installed, use this command:

   curl -LO "https://dl.k8s.io/release/v1.22.16/bin/windows/amd64/kubectl.exe"
   

   Note: To find out the latest stable version (for example, for scripting), take a look at https://dl.k8s.io/release/stable.txt.

2. Validate the binary (optional)

   Download the kubectl checksum file:

   curl -LO "https://dl.k8s.io/v1.22.16/bin/windows/amd64/kubectl.exe.sha256"
   

   Validate the kubectl binary against the checksum file:

   • Using Command Prompt to manually compare CertUtil's output to the checksum file downloaded:

     CertUtil -hashfile kubectl.exe SHA256
     type kubectl.exe.sha256
     

   • Using PowerShell to automate the verification using the -eq operator to get a True or False result:

     $($(CertUtil -hashfile .\kubectl.exe SHA256)[1] -replace " ", "") -eq $(type .\kubectl.exe.sha256)
     

3. Add the binary in to your PATH.

4. Test to ensure the version of kubectl is the same as downloaded:

   kubectl version --client
   

Install on Windows using Chocolatey or Scoop

1. To install kubectl on Windows you can use either Chocolatey package manager or Scoop command-line installer.

   • choco
   • scoop

   choco install kubernetes-cli
   

   scoop install kubectl
   

2. Test to ensure the version you installed is up-to-date:

   kubectl version --client
   

3. Navigate to your home directory:

   # If you're using cmd.exe, run: cd %USERPROFILE%
   cd ~
   

4. Create the .kube directory:

   mkdir .kube
   

5. Change to the .kube directory you just created:

   cd .kube
   

6. Configure kubectl to use a remote Kubernetes cluster:

   New-Item config -type file
   

Verify kubectl configuration

In order for kubectl to find and access a Kubernetes cluster, it needs a kubeconfig file, which is created automatically when you create a cluster using kube-up.sh or successfully deploy a Minikube cluster. By default, kubectl configuration is located at ~/.kube/config.

Check that kubectl is properly configured by getting the cluster state:

kubectl cluster-info

If you see a URL response, kubectl is correctly configured to access your cluster.

If you see a message similar to the following, kubectl is not configured correctly or is not able to connect to a Kubernetes cluster.

The connection to the server <server-name:port> was refused - did you specify the right host or port?

For example, if you are intending to run a Kubernetes cluster on your laptop (locally), you will need a tool like Minikube to be installed first and then re-run the commands stated above.

If kubectl cluster-info returns the url response but you can't access your cluster, to check whether it is configured properly, use:

kubectl cluster-info dump

Optional kubectl configurations and plugins

Enable shell autocompletion

kubectl provides autocompletion support for Bash and Zsh, which can save you a lot of typing.

Below are the procedures to set up autocompletion for Zsh, if you are running that on Windows.

The kubectl completion script for Zsh can be generated with the command kubectl completion zsh. Sourcing the completion script in your shell enables kubectl autocompletion.

To do so in all your shell sessions, add the following to your ~/.zshrc file:

source <(kubectl completion zsh)

If you have an alias for kubectl, you can extend shell completion to work with that alias:

echo 'alias k=kubectl' >>~/.zshrc
echo 'compdef __start_kubectl k' >>~/.zshrc

After reloading your shell, kubectl autocompletion should be working.

If you get an error like complete:13: command not found: compdef, then add the following to the beginning of your ~/.zshrc file:

autoload -Uz compinit
compinit

Install kubectl convert plugin

A plugin for Kubernetes command-line tool kubectl, which allows you to convert manifests between different API versions. This can be particularly helpful to migrate manifests to a non-deprecated api version with newer Kubernetes release. For more info, visit migrate to non deprecated apis

1. Download the latest release with the command:

   curl -LO "https://dl.k8s.io/release/v1.22.16/bin/windows/amd64/kubectl-convert.exe"
   

2. Validate the binary (optional)

   Download the kubectl-convert checksum file:

   curl -LO "https://dl.k8s.io/v1.22.16/bin/windows/amd64/kubectl-convert.exe.sha256"
   

   Validate the kubectl-convert binary against the checksum file:

   • Using Command Prompt to manually compare CertUtil's output to the checksum file downloaded:

     CertUtil -hashfile kubectl-convert.exe SHA256
     type kubectl-convert.exe.sha256
     

   • Using PowerShell to automate the verification using the -eq operator to get a True or False result:

     $($(CertUtil -hashfile .\kubectl-convert.exe SHA256)[1] -replace " ", "") -eq $(type .\kubectl-convert.exe.sha256)
     

3. Add the binary in to your PATH.

4. Verify plugin is successfully installed

   kubectl convert --help
   

   If you do not see an error, it means the plugin is successfully installed.

What's next

• Install Minikube
• See the getting started guides for more about creating clusters.
• Learn how to launch and expose your application.
• If you need access to a cluster you didn't create, see the Sharing Cluster Access document.
• Read the kubectl reference docs